Out Of Memory Message - Brother MFC-9840CDW User Manual

Chapter 5

Out of memory message

If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Mono Start to send
the pages scanned so far, or to press
Stop/Exit to cancel the operation.
Note
• If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 43.)
• To make extra memory available, you can
do the following:
• Print the faxes that are in the memory.
(See Printing a fax from the
memory on page 52.)
• Turn off Fax storage.
(See Turning off remote fax
options on page 67.)
• Add Optional Memory
(See Memory board on page 108.)
46
5