Iec60825-1+A2:2001 Specification - Brother MFC-9840CDW User Manual

If moving your machine, use the handholds
provided. First making sure to disconnect any
cables. To prevent injuries when moving or lifting
this machine, make sure to use at least two people.
DO NOT use flammable substances or any type of spray to clean the inside or outside of the
machine. Doing this may cause a fire or electrical shock. Refer to Routine
maintenance on page 147 for how to clean the machine.

IEC60825-1+A2:2001 Specification

This machine is a Class 1 laser product as defined in IEC60825-1+A2:2001 specifications. The
label shown below is attached in countries where required.
This machine has a Class 3B Laser Diode which emits invisible
laser radiation in the Scanner Unit. The Scanner Unit should not
be opened under any circumstances.
Laser Diode
Wave length: 780 - 800 nm
Output: 30 mW max.
Laser Class: Class 3B
WARNING
Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.
Safety and legal
A
A
A
101