Fax Detect; Setting The Print Density - Brother MFC-9840CDW User Manual

Chapter 6

Fax Detect

Turning fax detect On (default setting) allows
the machine to receive fax calls automatically
if you lift any handset on the same line as the
machine.
When you see Receiving on the LCD or
when you hear 'chirps' through the handset of
an extension telephone connected to another
telephone wall socket, just replace the
handset and your machine will receive the
fax.
If this feature is set to On, but your machine
does not connect a fax call when you lift the
handset of an extension or external
telephone, press l51 on the external or
extension telephone. (See Operation from
extension telephones on page 54.)
Note
• You need to turn the Remote Codes
setting to on to use the Fax Receive Code
(l51). (See Using remote
codes on page 56.)
• If you use a modem, or send faxes from a
computer, on the same line and your
machine intercepts them, set fax detect to
Off.
• We do not recommend having a PC plus
fax machine on the same line.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 3.
21.Setup Receive
3.Fax Detect
a
On
b
Off
Select ab or OK
c
Press a or b to choose On or Off.
Press OK.
d
Press Stop/Exit.
50

Setting the print density

6
You can adjust the print density to make your
printed pages darker or lighter.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 7.
21.Setup Receive
7.Print Density
-nnonn+
Select d c & OK
c
Press c to make the print darker.
Or, press d to make the print lighter.
Press OK.
d
Press Stop/Exit.
.
6
.