Brother MFC-9840CDW User Manual page 140

Error Message
Change Parts
Fuser Unit
Change Parts
Laser Unit
Change Parts
PF kit MP
Change Parts
PF kit 1
Change Parts
PF kit 2
Change Parts
Waste Toner Box
Check Paper Size
Comm.Error
Connection Fail
Cooling Down
Wait for a while
Cover is Open
Close the Front
Cover.
130
Cause
It is time to replace the fuser
unit.
It is time to replace the laser
unit.
It is time to replace the paper
feeding kit for the MP tray.
It is time to replace the paper
feeding kit for Tray 1.
It is time to replace the paper
feeding kit for Tray 2.
The waste toner box is almost
full.
The paper in the tray is not the
correct size.
Poor telephone line quality
caused a communication
error.
You tried to poll a fax machine
that is not in Polled Waiting
mode.
The temperature of the drum
unit or toner cartridge is too
hot. The machine will pause its
current print job and go into
cooling down mode. During
the cooling down mode, you
will hear the cooling fan
running while the LCD shows
Cooling Down, and
Wait for a while.
The front cover is not closed
completely.
Action
Call your Brother dealer to purchase the fuser
unit.
Call your Brother dealer to purchase the laser
unit.
Call your Brother dealer to purchase the
PF Kit MP.
Call your Brother dealer to purchase the
PF Kit 1.
Call your Brother dealer to purchase the
PF Kit 2.
Be ready to replace the waste toner box. (See
Replacing the waste toner box on page 184.)
Load the correct size of paper in the tray and set
" "
the Paper Size (Menu, 1, 3) and
(Menu, 1, 6). (See Paper size on page 23, Tray
use in copy mode on page 23, Tray use in fax
mode on page 24 and Tray use in print
mode on page 24.)
Try sending the fax again or try connecting the
machine to another telephone line. If the
problem continues, call the telephone company
and ask them to check your telephone line.
Check the other fax machine's polling setup.
Make sure that you can hear the fan in the
machine spinning and that the exhaust outlet
isn't blocked by something.
If the fan is spinning, remove any obstacles that
surround the exhaust outlet, and then leave the
machine turned on but do not use it for several
minutes.
If the fan is not spinning follow the suggestions
below.
Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes and then
try it again. (The machine can be turned off for
up to 60 hours without losing faxes stored in the
memory.)
Close the front cover of the machine.
" "
Tray Use