Listening To Radio Broadcasts; Tuning Radio Statrons; Presettrng Radro Stations Manually - Kenwood VR-6060 Instruction Manual

Listening to radio broadcasts
The mmver can store up to 40 stations in the memory and recall them
by one-touch operation
Tuning radio stations
B?ND
MULTI CONTROL
I
TUNING
TUNER AUTO
m
AUTO
-Joystick
(MULTI CON1
*BAND
-TUNER
'ROLAlV)
q
Use the TUNER key to select the tuner.
q
Use the BAND key to select the desired broadcast band.
Each press switches the band.
q
Use the AUTO key to select the desired tuning method.
Each press switches the tuning method to either auto or manual
tuning.
"AUTO" indicator lights up in the drsplay.
l
Normally, set to "AUTO" (auto tunrng) If the radio waves are weak
and there IS a lot of Interference, swatch to manual tunrng. iWIth
manual tunrng. stereo broadcasts wrll be recerved rn monaural )
q
Use the MULTI CONTROL knob or Joystick (r/r), or TUNING
++ /W keys to select the station.
"STEREO" lights when a broadcast IS being recerved rn stereo
"TUNED" is displayed when a station IS received
Auto tuning : The next station IS tuned automattcally
Manual tuning : Turn the knob or use the Joystrck (r/Vi to
select the desired station.
Presetting radio stations manually
MULTI CONTROL
TUNER MEMORY
q
Tune to the station you want to store.
q
Press the MEMORY key while receiving the station.
Blinks for 5 seconds
Lights for 5 seconds
Proceed to step EI within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
m Use the MULTI CONTROL knob or Joystick (A/V) to select
one of the station presets (1 - 40).
q
Press the MEMORY key again to confirm the setting.
l
Repeat steps 0. 8, El, and
q
to store as rmany statlons as
necessary
l
If you store a statron at a prevrously used preset, the old statron WIII
be replaced by the new one
26EN