Kenwood VR-6060 Instruction Manual page 33

Ambience effects
TruBass adjustment mode (CSll mode only)
T~uBass adjustment provides deep, rich bass sound to small speakers
wIthout the need of a subwoofer
0 Press the SOUND key, then press the A/V keys or Joystick (r/w)
until "TruBass" appears.
0 Use the MULTI CONTROL knob or Joystick (r/r) to select the
following;
I TruBass OFF
2 TruBass SW
3 TruBass LR
4 TruBass SW + LR
l
After selecting 2, 3 or 4 ,TruBassspeakers~zeandlevelad~ustment
selection WI/I be awlable
0 For TruBass speaker selection, use the MULTI CONTROL knob
or Joystick (A/V) to select any of the following display;
c
I TruBass LARGE
z TruBass MID
3 TruBass SMALL
0 Use the MULTI CONTROL knob or Joystick (A/T) to adjust the
TruBass Level.
l
The adjustment range IS from 0 (TruBass OFF) to 10
Center II:WJ~ WIII lbe Iheal-d fl-om left and right speakers ot?ly
Circle Surround II mode
When yoi~ select the circle swround II mode, yoil WIII be able to enjoy the
tmulti SUIIOLI~~~ sound from the stereo source
UsetheLlSTENMODE knoborLlSTEN MODE o/n keysforCSIIselection.
Center focus mode (CSII mode only)
Cellter focus elevate level adjustment allows you to enjoy an enchanced
sotlnd v4leil you select CS I[ CINEMA/MUSIC/MONO It leposltlons tile
sound image to an optlmal positIon mole natural to the Ilstener tl?rough
the center image
0 Press the SOUND key, then pressthe A/V keys or Joystick (4,)
until "CENTER FOCUS" appears on the display.
Subwoofer adjustment
It IS easy to adjust the volume of the subwoofer using the remote control
0 Press the SOUND key, then press the A/V keys or Joystick (4,)
until "SUBW" appears on the display.
0 Use the MULTI CONTROL knob or Joystick
(A/T)
to adjust the
volume.
l
The adjustment range IS from -10 dB to +I0 dB
8 Use the MULTI CONTROL knob or Joystick
(A/T)
to adjust the
center elevation level.
0 The adlustment range IS flom 0 to 10
e CEItiTFR FOCUS w/l tnot be wallable wllen the celxer weaker IS OFF
CSII Rear Delay adjustment mode (CS II mode only)
CS II Real Delay ad~~lslt-nent ptovldes a bettel sowd effect from tl?e rear
speakers
0 Press the SOUND key, then press the A/V keys or Joystick (4/b)
until "CSH DLY" appears on the display.
0 Use the MULTI CONTROb knob or Joystick
(A/T)
to adjust the
rear speaker.
*The ad]clsln?ent Ianye IS flown 0 ms to 25 ems
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display You mlgl?t find this useful If you darken your room to watch
movies or listen to I~USIC
Each time you press the DIMMER key, the display's brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
I Bright
2 Medium
3 Dark
CS II Gain adjustment mode (CSh' mode only)
CS II GAIN allows osel to adjust the Input gall? toI tlw CII& Sunou~~l II
processing
0 Press the SOUND key, then press the A/V keys or Joystick
(4/b)
until "CSII GAIN" appears on the display.
0 Use the MULTI CONTROL knob or Joystick
(A/T)
to adjust the
input gain.
0 The ddlustivent fange IS ftom 0 to 18
96kHz LPCM playback
Tile receiver IS conlpatlble with the 96kHr LPCM playback To play a
36kHz DVD, set the listen mode to "STEREO"
l
In
FULL AUTO
Illput mode the Ilsten mode wll automatically be STEREO
l
When I"
DIGITAL MANUAL
Input mode (lIsten mode IS not STEREO),
"FS 96kHz" WIII appear II? the display and no sound can be heard from
the speakers
Press the LISTEN MODE or STEREO key (the listen mode changes to
tile STEREO mode) to output sound from the speakers