Recording; Recording Audio (Analog Sources); Recording Video; Listening To Radio Broadcasts - Kenwood VRS-5100 Instruction Manual

Recording

Recording audio (analog sources)

Recording a music source
1 Use the INPUT SELECTOR knob or Input Selector keys to select
the source (other than "VIDEO1") you want to record.
2 Set the recorder to VIDEO1 to record.
3 Start playback, then start recording.

Recording video

1 Use the INPUT SELECTOR knob or Input Selector keys to select
the video source (other than "VIDEO1") you want to record.
2 Set the video deck connected to VIDEO1 to record.
3 Start playback, then start recording.
• Recording may not be normal for some video software. This is due to
the copy guard condition.
INPUT SELECTOR
º

Listening to radio broadcasts

The receiver can store up to 40 stations in the memory and recall them
by one-touch operation.
Radio stations can be classified into RDS (Radio Data System) stations
and other stations. To listen to or store RDS stations in the preset
memory see "Using RDS (Radio Data System)".
• The RDS function is only for the Europe.

Tuning (non-RDS) radio stations

MULTI CONTROL∞¥5
BAND
TUNING
1¥¡
TUNER
1
Use the INPUT SELECTOR knob or TUNER key to select the
tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band
as follows:
1 FM
2 AM
3
Use the AUTO key to select the desired tuning method.
Each press switches the tuning method as follows:
1 AUTO lit (auto tuning)
2 AUTO not lit (manual tuning)
"AUTO" indicator lights up in the display.
DOLBY DEX NEO:6 DSP TS MUTE
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
• Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL ∞ / 5 keys or TUNING 1 / ¡
keys to select the station.
DOLBY DEX NEO:6 DSP TS MUTE
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
Auto tuning : The next station is tuned automatically.
Manual tuning : Press the MULTI CONTROL ∞¥5 keys or TUNING
1¥¡ keys to select the desired station.
INPUT SELECTOR
BAND
AUTO
"AM" or "FM" indicator
appears in the display
DIGITAL RDS PTY ST.
DIGITAL RDS PTY ST. TUNED
L
AUTO
FM/AM LFE
kHz
LS S BS RS
MHz
"ST." lights when a broadcast
is being received in stereo.
DIGITAL RDS PTY ST. TUNED
L
AUTO
LFE
FM/AM
kHz
LS S BS RS
MHz
"TUNED" is displayed
when a station is received.
TUNED
AUTO
FM/AM
kHz
MHz
C R
SW
C R
SW
19
EN