Ir Repeater (For Vr-6060 Only) - Kenwood VR-6060 Instruction Manual

Setting up the system
Connecting the RF antenna and external IR Repeater
(For ~~-6060 only)
The remote control for this receiver has the RF (radio frequency) and IR (infrared rays) transmrssron functron IR repeaters enables you to control
components located rn cabrnets or behind glass doors You can enjoy a wider remote control srgnal range by placrng the RF antenna and IR repeater away
from the recerver.
KENWOOD components (except DVD player): System control
Other components: (Registering setup codes) IR REPEATER
- &
-22
(For RF Transmitter, select either
1. RF REMOTE Band I, or
2. RF REMOTE Band 2)
Connecting IR repeater
0 Connect the IR repeater to the device as described in the
repeater's manual.
Q Connect the IR repeater cable(s) to the IR REPEATER OUT
jack(s).
Notes
l
IR repeaters send a srgnal srmrlar to the device's own remote control.
Xantech repeaters (models 282-00, 286-00, or 283-001 are compatrble
with Your new audio-vrdeo recerver.
Cynecting the RF remote antenna
@ Insert the jack of the provided RF remote antenna into the
RF REMOTE ANTENNA jack.
0 Place the antenna wire vertically and fix it.
l
Place the antenna away from the metallic panel.
Shape of plug to be connected.
IR OUT SPECIFICATION:
Terminal
To Tip
To Sleeve
IR OUT LCD
~~~ot~
Signal
Ground
18EN