Operations Listening To Radio Broadcasts; Tuning Radio Stations; Presetting Radio Stations Manually - Kenwood VR-716 Instruction Manual

Listening to radio broadcasts
The receiver can store up to 40 stations in the memory and recall them
by one-touch operation.

Tuning radio stations

BAND AUTO
Multi % / fi
Tune 1 / + ¡
Auto
1
Use the INPUT SELECTOR knob or TUNER key to select the
tuner.
2
Use the BAND key to select the desired broadcast band.
Each press sw itches the band
as follow s:
1 FM
2 AM
3
Use the AUTO key to select the desired tuning method.
Each press sw itches the tuning method as follow s:
1 AUTO lit (auto tuning)
2 AUTO not lit (manual tuning)
• Normally, set to " AUTO" (auto tuning). If the radio w aves are w eak
and there is a lot of interference, sw itch to manual tuning. (With
manual tuning, stereo broadcasts w ill be received in monaural.)
4
Use the M ULTI CONTROL knob or M ulti % / fi , or Tune – 1 / +
¡ keys to select the station.
Frequency
display
Auto tuning : The next station is tuned automatically.
M anual tuning : Turn the knob (press the key) to select the
desired station.
MULTI CONTROL
INPUT SELECTOR
TUNER
+ +
¢
Band
4
+
" AM " or " FM " indicator
appears in the display
" AUTO " indicator lights
up in the display.
" ST. " lights w hen
a broadcast is being
received in stereo.
" TUNED " is displayed
w hen a station is received.

Presetting radio stations manually

MEMORY
1
Tune to the station you w ant to store.
2
Press the M EM ORY key w hile receiving the station.
Blinks for 5 seconds
Proceed to step 3 w ithin 5 seconds.
(If more than 5 seconds elapse, press the M EM ORY key again).
3
Use the M ULTI CONTROL knob or M ulti % / fi keys to select
one of the station presets (1 – 40).
4
Press the M EM ORY key again to confirm the setting.
• Repeat steps 1 , 2 , 3 , and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the previous station
w ill be replaced by the new one.
MULTI CONTROL
Lights for 5 seconds
21 EN