Drgrtal Connectrons - Kenwood VR-6060 Instruction Manual

Settina UIJ the svsfem
Digital connections
The dIgItal tn lacks can accept DTS, Dolby DIgItal, or PCM signals Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format dIgItal signals
If you have connected any dIgItal components to the receiver, be sure to read the "Input mode settings" section carefully
c
OPTICAL DIGITAL OUT (AUDIO)
CD or DVD player
OPTICAL DIGITAL OUT (AUDIO)
Optical fiber cable
Component with DTS,
\
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See "Connecting video components".)
-a
COAXIAL DIGITAL OUT (AUDIO)
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
demodulator
I I
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
-x
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
LD player
I To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)