Connectrng The System Control - Kenwood VR-6060 Instruction Manual

Setting up tffe system
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
This unit is compatible only with the [SL-161 mode. The system
control operation is not available if the unit is connected in the
[XS81, [XSI, or [XRI connection mode.
If your component has the mode select switch, set the connected
components to the ISL161 mode.
l
YOLI rmay cotltlect the system control cord to either the up or down
jack
EXAMPLE: ISL161 mode connections
The underlIned portion represents the setting of the systetn control
mode
tsL161
[sL161 [XSI IXS81 [XRI
IsL161 [XSI LXS81
Receiver
Cassette deck
--li
SYSTEM
or MD recorder
CONTROL
cord
CD player
IXSI
-1
l
In order to take advantage of the system control operatrons, the
components must be conrxcted to the correct jacks To use a CD
player It must be connected to the CD jacks To use a cassette deck
(or MD recorder) It must be connected to the MDRAPE tacks When
usrng more than one CD player (etc.) only the one connected to the
specrfred jacks may be connected for system control.
l
Some CD players and cassette decks are not compatrble with the
ISLI 61 system control mode Do not make system connections wrth
equrpment that IS tnot ISLIE] compatrble
l
Some MD players are not system control compatrble You cannot
make system control connectrons to this kind of equrpment
Notes
1 ISL161 equrpment carnnot be combrned wrth IXRI, [XSI, and IXS81
eqlripment for system operatrons If your equrpment consrsts of
thus kind of combination, please do not connect any system con-
trol cords Even without system control cords, normal operatrons
can be camed out wrthout effectrng performance
2 Do not connect system control cords to any cotnponents other
than those specrfred by KENWOOD It may cause a malfunctron
and darnage your equipment
3 Be sure the system control plugs are Inserted all the way II? to the
system control termrnals
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate thus unit with the system remote supplred wrth the
recerver.
Automatic Operation
When you start playback from a source component, the input selector
on thus unit swatches to that component automatrcally.
Synchronized Recording
Lets you synchronrze recording wrth the start of playback when
recording from CD, MD or analog discs.
I . .
Regrstermg setup codes for KENWOOD audio components
If you own remote controllable KENWOOD audio components that
are not compatible wrth system control, registering the setup code
enables you to control those components using the remote control
supplled with this unit (without connecting system control cords). To
register setup codes for your remote controllable KENWOOD audio
components, see "Regtstenng setup codes for other components"
-m