Names And Functions Of Parts; Main Unit - Kenwood VR-6060 Instruction Manual

Names and functions of parts
Main unit
Speaker MUTE CLIP Input mode
Listen mode
indicators indicator
Indicator indicators indicators
Speaker selection indicators
Input channel Indicators
Output channel Indicators
Frequency display
Preset channel display
Surround mode display
For VR-6060
A A
0 POWER ON/OFF key
(For KRF-V8060D)
-_2Y
Use to turn the maln power ON/OFF
0 ON/STANDBY f&z ) key
(For KRF-V8060D) -EL
Use to turn the power ON/STANDBY when
the POWER IS turned ON
STANDBY indicator
0 POWER ON/STANDBY (0 I key
(For VR-6060)
-j&
Use to turn the power ON/STANDBY
STANDBY indicator
0 A SPEAKERS B keys
-L??.
Use to turn the A/B speakers ON/OFF
0 LOUDNESS key -2%
Use to switch the status of LOUDNESS.
0 SPEAKER ECl key
-24
Use to select SPEAKER EQ's setting
0 Surround indicators
DSP indicator -&
Lights when the receiver IS In the DSP mode
SPEAKER EQ indicator
-zc
Lights when the receiver IS In the SPEAKER
EQ mode
ACTIVE EQ indicator
-2%
Lights when the receiver IS in the ACTIVE EQ
Inode
DOLBY DIGITAL indicator
-2c
Ltghts when the receiver IS in the Dolby
DIgItal mode
DTS indicator -LX
Lights when the receiver IS in the DTS mode
CS II indicator -E
Lights when the receiver IS in the CIRCLE
SURROUND ll mode
0 ACTIVE EQ key
-14
Use to select ACTIVE EQ's setting
0 DSP key
-L&L
Use to select any of the DSP mode.
0 STEREO key
-22
Use to switch the ilsten mode to STEREO
0 INPUT MODE key -,8,
Use to switch between the full auto, dIgItal
and analog Inputs
@ DIMMER key
Use to select the REC MODE
-g
Use to adjust the brightness of the display
-2%
0 VOLUME CONTROL knob
-LX
0 MUTE key
-124
Use to temporarily mute the sound
@ PHONES jack
-,2x,
Use for headphone llstenlng
0 Input Selector keys
-EL
(DVD/GCH, CD/DVD, PHONO, TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)
Use to select Input sources
@ SOUND key - 22
Use to adjust the sound quality and the ambl-
ence effects
@ BAND key
-m
Use to select the broadcast band.
0 AUTO key
-EL
Use to select the auto or manual tuntng
mode
@ TONE key
-lZL
Use to switch the status of TONE control
@ MEMORY key
-a
Use to store radio statlons in the preset
memory
@ SETUP key -EL
Use to select the speakers' settings etc.
@ A/V keys
-GE
Usefor selectlonad~ustmentsdunngSOUND,
SETUP and PRESET CHANNEL functions.
@ MULTI CONTROL knob
-!Z
Use to control a variety of settings.
@ LISTEN MODE knob
-M -
Use to select the listening mode.
@ AV AUX (S VIDEO, VIDEO, AUDIO L/R)
jacks -W
@ AV AUX key
-QE
Use to switch the Input to AV AUX.
Standby mode
While the standby lndlcator IS llt, a small amount of power IS supplled
to the system to back up the memory This IS called standby mode
Under the condition, the system can be turned ON by remote control
umt
Connection at POWER ON/OFF key (for KRF- V806OD)
The power In this equipment WII not be completely cut off from the AC
wall outlet when the main switch IS turned OFF.
gEN