Unpacking; Assembly And Functions; To Assemble The Accessories - Chicago Electric 90891 Set Up And Operating Instructions Manual

When unpacking, check to make sure all the parts shown on the Parts Lists on
pages 22 and 23 are included. If any parts are missing or broken, please call Harbor
Freight Tools at the number shown on the cover of this manual as soon as possible.
Note: For additional references to the parts listed in the following pages, refer to the As-
sembly Diagrams on pages 24 and 25.

To Assemble The Accessories:

WARNING! Prior to performing any assembly procedures, make sure the Power
Cord of the Miter Saw is unplugged from its electrical outlet.
1. The Miter Saw comes with several accessories that may be attached to the unit.
FIgURE D
2. The Dust Collection Bag (154) can be attached by inserting the bag opening onto
the top of the Elbow (4). The Dust Collection Bag helps keep the work area
clean by catching sawdust and wood chips which are thrown off by the Saw
Blade (51). When the Dust Collection Bag is half full, remove it from the Miter
Saw, empty, and reattach it to the Miter Saw. (See Figure D.)
SKU 90891 For technical questions, please call 1-800-444-3353.

UNPACKINg

ASSEMBLY AND FUNCTIONS

ELBOW
(47)
DUST COLLECTION BAg
BAFFLE PLATE
(151)
(154)
HOLDER (149)
Page 10