Specifications; Unpacking; Instructions For Putting Into Use - Chicago Electric 66755 Set Up And Operating Instructions Manual

sPeciFicaTions

Battery Specifications
Type 18VDC, NiCd, 1.3Ah
Circular Saw Specifications
Max. RPM 4000 RPM
Blade 5-1/2" Dia. / 6,000 RPM
Arbor 10MM
Max Cutting
1-1/2" at 90°, 1-1/16" at 45°
Depth
Cutting Angle 0 to 45°
reciprocating Saw Specifications
Blades Two 4-3/4" / 3,300 SPM
Stroke Length 7/8"
Drill Specifications
Max. RPM 600 RPM
Chuck 3/8" Keyless Type
Torque 23 Torque Settings/
Settings 1 Drill Setting
Flashlight Specifications
Switch Push Button On/Off
Bulb Type 9 LEDs
Head Positions 7
Charger Specifications
Input Power 120V / 60 Hz
Output Power 22VDC (max.) / 400mA
LED Indicator Red when charging;
Light Green when fully charged,
Charge Time 3 - 5 hours
SKU 66755 For technical questions, please call 1-800-444-3353.

unPacking

When unpacking, check to make sure
that the item is intact and undamaged. If any
parts are missing or broken, please call Har-
bor Freight Tools at the number shown on the
cover of this manual as soon as possible.
insTrucTions For PuTTing
inTo use
read the enTire iMPorTanT
saFeTY inForMaTion
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
FroM accidenTaL
oPeraTion:
Turn the Power switch of the tool
to its "oFF" position and unplug
the tool from its battery Pack (1)
before assembling or making any
adjustments to the tool.
To PreVenT serious injurY
FroM FLYing sHraPneL:
do not use any abrasive wheels
on the circular saw. The saw and
its guards are not designed to
accommodate abrasive wheels.
note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
To PreVenT
serious injurY
Page 11