Table of Contents
Advertisement
Quick Links
7-1/4" CIRCULAR SAW
WITH LASER GUIDE
Model 91757
ASSEMBLY AND OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
Copyright 2004 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Chicago Electric 91757
Summary of Contents for Chicago Electric 91757
- Page 1 7-1/4” CIRCULAR SAW WITH LASER GUIDE Model 91757 ASSEMBLY AND OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. ©...
-
Page 2: Product Specifications
GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed in the following pages may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS SKU 91757 For technical questions please call 1-800-444-3353 PAGE 2... -
Page 3: Work Area
Never hold the workpiece by hand. Holding the work by hand is unstable and may lead to loss of control. Only work on a workpiece that is properly secured. SKU 91757 For technical questions please call 1-800-444-3353 PAGE 3... -
Page 4: Electrical Safety
Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or SKU 91757 For technical questions please call 1-800-444-3353 PAGE 4... -
Page 5: Double Insulated Tools: Tools With Two Prong Plugs
DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with SKU 91757 For technical questions please call 1-800-444-3353 PAGE 5... -
Page 6: Extension Cords
(See Figure B.) If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. SKU 91757 For technical questions please call 1-800-444-3353 PAGE 6... - Page 7 150% of the rated amperes. FIGURE B SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions xxxx/min. Per Minute (RPM) FIGURE C SKU 91757 For technical questions please call 1-800-444-3353 PAGE 7...
-
Page 8: Specific Safety Rules
To avoid accidental injury, always wear heavy duty work gloves when changing a Saw Blade. Make sure the workpiece is free from nails and any other foreign objects which can damage the Saw Blade (83). SKU 91757 For technical questions please call 1-800-444-3353 PAGE 8... - Page 9 G. Use caution when making a pocket cut into existing walls or other blind areas. The Saw Blade (83) may cut objects that can cause kickback. Also, check to make sure there are no electrical wires or cables in the cutting path. SKU 91757 For technical questions please call 1-800-444-3353 PAGE 9...
- Page 10 WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to SKU 91757 For technical questions please call 1-800-444-3353 PAGE 10...
- Page 11 Lower Guard (78). (See Figure D.) SAW BLADE (83) TEETH POINTING UPWARD LOWER BLADE OUTER FLANGE GUARD BOLT (84) (78) (85) SKU 91757 For technical questions please call 1-800-444-3353 PAGE 11...
- Page 12 To turn on the Saw depress the Lock-Off Button. Then squeeze the Power Switch, and release the Lock-Off Button. To turn off the Saw, release pressure on the Power Switch. (See Figure F, next page.) SKU 91757 For technical questions please call 1-800-444-3353 PAGE 12...
- Page 13 DEPTH LOCK KNOB (71) BASE (76) FIGURE G To Adust The Angle Of Cut: The angle of cut may be adjusted from 90 to 45 (See Figure H, next page.) SKU 91757 For technical questions please call 1-800-444-3353 PAGE 13...
- Page 14 Rip Guide in position. NOTE: The Rip Guide can be used from both sides of the Base. (See Figure I.) RIP GUIDE BASE (102) (76) RIP GUIDE KNOB FIGURE I (68) SKU 91757 For technical questions please call 1-800-444-3353 PAGE 14...
- Page 15 90 and 45 degree angles. (See Assy. Diagram.) Once the Laser Beam is adjusted replace the Side Cover and two Screws (45, 46). (See Assy. Diagram.) SKU 91757 For technical questions please call 1-800-444-3353 PAGE 15...
-
Page 16: Inspection, Maintenance, And Cleaning
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 91757 For technical questions please call 1-800-444-3353 PAGE 16... -
Page 17: Parts List
* These parts are not available individually. The complete Motor Assembly (103) must be ordered. NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 91757 For technical questions please call 1-800-444-3353 PAGE 17... -
Page 18: Assembly Diagram
ASSEMBLY DIAGRAM SKU 91757 For technical questions please call 1-800-444-3353 PAGE 18...
Need help?
Do you have a question about the 91757 and is the answer not in the manual?
Questions and answers