To Adjust The Miter Angle - Chicago Electric 90891 Set Up And Operating Instructions Manual

To Adjust The Miter Angle:

WARNING! Prior to performing this procedure, make sure the Power Cord of the
Miter Saw is unplugged from its electrical outlet.
FIgURE N
1. The miter angle of a cut may be adjusted 0 - 45 degrees to the right or left. To do
so, loosen the Fasten Knob (104) located on the Guide Fence (105).
(See Figure N.)
2. Move the Turn Base (125) to the right or left until the desired miter angle of cut is
indicated by the Scale Plate (141). Then, retighten the Fasten Knob (104) to lock
the Miter Saw in place. (See Figure N.)
SKU 90891 For technical questions, please call 1-800-444-3353.
SCALE PLATE
(141)
Knob (74)
FASTEN KNOB (104)
TURN BASE
(125)
gUIDE FENCE (105)
Page 18