Specifications; Unpacking; Components And Controls - Chicago Electric 66753 Set Up, Operating, And Servicing Instructions

speCifiCatiOns

Type
Engine Rating
Start
Bore x Stroke
Compression Ratio
Displacement
Sound Level
Type
Fuel
Fuel/Oil Ratio
Capacity
Type
Spark Plug
Gap
Idle
Speed
No Load
Blade
Size
(not
included)
Arbor
Max. Cutting Depth
Belt
Air Filter
note: Additional specifications found in
the TECHNICAL ENGINE SPECIFI-
CATIONS chart in this manual.
The emission control system for this
Saw's Engine is warranted for standards
set by the U.S. Environmental Protection
Agency and by the California Air Resourc-
es Board (also known as CARB). For war-
ranty information, refer to the last pages of
this manual.
At high altitudes, the engine's carbu-
retor, governor (if so equipped), and any
other parts that control the fuel-air ratio will
need to be adjusted by a qualified me-
chanic to allow efficient high-altitude use
and to prevent damage to the engine and
any other devices used with this product.
SKU 66753 for technical questions, please call 1-800-444-3353.
2 Stroke, air cooled
4.7 horsepower
Recoil
1.89" x 1.34"
7.5:1
61.5 cc
105 dB @ 3 ft.
90+octane unleaded
gasoline/2-cycle oil
40:1
0.7 L (0.18 Gallons)
NGK - BPMR7A
TORCH - L6RTC
0.02" (0.5mm)
2600 RPM
9500 RPM
14" dia.
7/64" to 1/4" thick
1" / 20 mm
4-1/2"
SPZ 900
Prefilter (Foam)
Paper Cartridge
Flocked Aux.

unpaCKinG

When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.

Components and Controls

Front Handle (8E)
Starter
Handle (13I)
Starter
Cover (4I)
Gas Cap (17F)
Water Valve (3O)
Decompression
Valve (13K)
Trigger
Locking
Button
Choke (6H)
Quick Connect
Trigger (7F)
Hose Fitting (5O)
Air Filter Cover (5G)
Trigger
Safety Lever
ON/OFF
Switch (14G)
Blade Guard
Adjustment
Handle (8B)
Blade
Guard
(7B)
Belt Guard (7A)
Blade
figure 1
Page 9