Chicago Electric 91938 Owner's Manual And Safety Instructions
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Saw
  5. 91938
  6. Owner's manual and safety instructions

Chicago Electric 91938 Owner's Manual And Safety Instructions

2 horsepower 14" industrial cut-off saw
Hide thumbs Also See for 91938:
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
2 HORSEPOWER
14" INDUSTRIAL
CUT-OFF SAW
REV 11k
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2004 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 91938

Advertisement

Table of Contents
loading

Related Manuals for Chicago Electric 91938

Summary of Contents for Chicago Electric 91938

  • Page 1 Tools required for assembly and service may not be included. ® . All rights reserved. Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. ITEM 91938...

  • Page 2: Table Of Contents

    7. DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was designed. 8. USE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not designed. SKU 91938...
  • Page 3 12. SECURE WORK. Use vise to hold work when practical. It’s safer than using your hand and it frees both hands to operate tool. SKU 91938 For technical questions, please call 1-800-444-3353. 13. DON’T OVERREACH. Keep proper footing and balance at all times.
  • Page 4 125 V~ 3-Prong Plug and Outlet. 8. The outlet must be properly installed and grounded in accordance with all codes and ordinances. 9. Do not use an adapter to connect this tool to a different outlet. SKU 91938...
  • Page 5 Swing Guard (53) should be allowed to operate automatically. 3. The Saw is not to be used for any cutting in the locked down position. The Saw should be locked down position only for carrying and storage.

  • Page 6: Vibration Safety

    6. Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work. 7. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. SKU 91938...

  • Page 7: Specifications

    Arbor Size Setup - Before Use Functions Vise Handle (28) Trigger (103) SKU 91938 For technical questions, please call 1-800-444-3353. 120V~ / 60Hz / 15A 3,500 RPM 14″ Cut‑Off Wheel for Metal (SKU 44814, included) 14″ Cut‑Off Wheel for Masonry (SKU 44815) 4‑1/4″...

  • Page 8: Operation

    To Remove or Install a Cut-Off Wheel 1. Raise the Saw if it is locked down by pushing down on it and pulling out the Lock Ball (25). 2. Open the Swing Guard (53) and tighten the Bolt (112) to secure it while working on the Wheel.
  • Page 9 3. After adjustment, tighten the Nut (15) against the Bracket (14) to lock the adjustment in place. SKU 91938 For technical questions, please call 1-800-444-3353. Page 9...

  • Page 10: Work Piece And Work Area Set Up

    To reposition the Angle Scale (35), remove both of the Bolts (41 & 44), and reattach the Angle Scale at the upper two screw holes. See Figure E. 4. There must not be objects, such as utility lines, nearby that will present a hazard while working. SKU 91938...

  • Page 11: General Operating Instructions

    For technical questions, please call 1-800-444-3353. 6. Repeat the cutting process starting with number 1 above. 7. Once the cut is completed, turn off the Saw by releasing the Trigger and unplug the unit. Do not attempt to remove the workpiece until the Cut-Off Wheel has stopped moving.

  • Page 12: Maintenance

    For technical questions, please call 1-800-444-3353. 2. AFTER USE, wipe external surfaces of the tool with clean cloth. WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician. SKU 91938...

  • Page 13: Troubleshooting

    4. Motor being strained by long or small diameter extension cord. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. SKU 91938 For technical questions, please call 1-800-444-3353. Likely Solutions 1. Check that cord is plugged in.

  • Page 14: Parts List And Diagram

    Front cover Bearing Half Washer Flange Washer Nut M6 Bolt M6x10 Nut M4 Left Handle Nut M5 Trigger with Lock Screw Wire Board Sheathing Power Cord Screw Right Handle Bolt 3-M5x50 111a Hex Key Socket Head Bolt REV 10a SKU 91938...

  • Page 15: Assembly Diagram

    Assembly Diagram Note: Hex Key (111a) - not shown. REV 10a, 10b SKU 91938 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents