FLAT HEAD SCREW (60)
CENTER COVER (55)
FIgURE H
2.
Remove the Flat Head Screw (60) and Center Cover (55). (See Figure H.)
SAFETY BUTTON
(16)
SWITCH LEVER
(25)
HANDLE COVER
(40)
SAFETY COVER (58)
FIgURE I
3.
Press in and hold the Shaft Lock (1) to keep the Spindle (35) from turning.
(See Figure I.)
4.
Use the accessory Hex Socket Wrench (150) to remove the Hex Flange Head
Bolt (61). NOTE: To remove the Hex Flange Head Bolt (61), turn the Bolt
CLOCKWISE. (See Figure J, next page.)
5.
Remove the Flange (52). (See Figure J, next page.)
SKU 90891
For technical questions, please call 1-800-444-3353.
SAFETY COVER (58)
SHAFT LOCK (1)
Page 13