Switching The Video Signal From The Video Output Terminal - Medion 4.1 MEGAPIXEL User Manual

SWITCHING THE VIDEO SIGNAL FROM THE VIDEO OUTPUT TERMINAL

The camera has a video-out terminal, allowing you to watch the captured images on TV by connecting
it to your TV with the supplied video cable.
The video output signal can be switched between NTSC and PAL.
What is an NTSC system and a PAL system?
Both are the color television broadcast system. The NTSC system is mainly used in U.S.A., Japan, Canada,
Mexico, the Philippines, Korea, etc. The PAL system is used in western Europe such as Germany, England,
Switzerland, Holland, Italy (except for France) and Australia, Singapore, Thailand, China, etc.
As these systems have no compatibility, you cannot watch the NTSC system based TV in the area where a PAL
system is used.
This camera can switch the video output signal to both an NTSC system and a PAL system. So you can watch the
images on TV not only in your country, but in other areas.
122
1 1 Rotate the function dial to
to turn on the camera.
• The power switch returns to the initial position.
2 2 Rotate the function dial to "SETUP".
• The setup mode menu is displayed on the LCD monitor.
and slide the power switch