6. First steps
6.1. Switching on the camera
Press the QP1QHH button to switch on the camera.
The lens comes out, the green light appears on the operating display and the display
switches on. The camera is then in operating mode.
PLEASE NOTE!
If the camera does not switch on, check whether the battery has been
inserted properly and whether it is charged.
6.2. Switching off the camera
Press the QP1QHH button to switch off the camera.
6.3. Setting the language, date and time
You will be prompted to set the language and time when you switch on the camera for
the first time.
6.3.1. Setting the language
Use the /and / buttons to select the required language.
Confirm your choice by pressing the QM button.
After the language has been set, the camera switches automatically to the menu so you
can set the date and time.
6.3.2. Setting date and time
Use the and buttons to choose the appropriate value for the date or time.
Use the and buttons to switch to the next entry
Confirm your settings by pressing the QM button.
140 of 434