Cautions When Connecting To; The Personal Computer - Medion 4.1 MEGAPIXEL User Manual

CAUTIONS WHEN CONNECTING TO THE PC
While the camera is connected to the computer or transferring the image data between the camera
and the computer, do not perform the operations listed below. Otherwise, an error may occur, the
camera and the computer may not function correctly, or the image data recorded in the CF card may
be erased or damaged.
• Turn off the power of the camera
• Disconnect the USB cable
• Rotate the function dial
• Remove or insert the CF card
On Windows 2000 and XP, the data transfer is not actually completed due to the writing delay,
even when the display on the computer shows that copying is finished. As the data is transferred for
a while even after the copying message disappears, do not turn off the power of the camera,
disconnect the USB cable or rotate the function dial during this time. Otherwise, an error may occur
and the camera and the computer not function correctly.
When the camera is connected to the computer and you are using the AC adapter, the time for the
auto power off function is automatically fixed at 30 minutes, regardless of the settings in the SETUP
mode (see page 113). When using batteries, the camera will still power off according to the settings
in the SETUP mode.
89