SPECIFYING THE TIME FOR THE AUTO POWER OFF FUNCTION
To save battery power, this camera will turn off automatically if it is not operated for more than 3
minutes. (Auto Power Off function) The time for the auto power off function is set to 3 minutes, unless
you change the setting after you purchase the camera.
1 1 Rotate the function dial to
to turn on the camera.
• The power switch returns to the initial position.
2 2 Rotate the function dial to "SETUP".
• The setup mode menu is displayed on the LCD monitor as shown in the
figure.
3 3 Press the
or
ed and press the
and slide the power switch
key so that [POWER SAVE] is highlight-
key.
Continued on Next page
113