INSERTING THE BATTERIES - CONT'D
CHECKING THE BATTERY POWER
When the batteries are installed in the camera, the camera checks the battery power automatically
and shows the result on the data panel.
* When nothing is displayed on the data panel, check that the batteries are installed with a correct
polarity (+/-). When nothing is displayed even though the batteries are installed correctly, replace
the batteries with new ones.
Lights - The batteries are fully charged.
Lights - Prepare new batteries. The batteries are no longer fully charged,
but the camera is completely functional.
All indicators go out and after that, blinks for 5 seconds and then, all
indicators go out again.
- You must:
• Replace all batteries with new ones.
• Remove all batteries and use the DC adapter (sold separately, see page 26).
Taking a picture or playing back cannot be executed.
25