BASIC RECORDING PROCEDURE
1 1 Rotate the function dial to
2 2 Slide the power switch to turn on the camera.
• The power switch returns to the initial position.
When first powered on, the camera is in the recording mode and the initial
setup for the LCD monitor is off. To turn on the LCD,
3 3 Determine the image composition while looking into LCD
monitor or viewfinder.
• When holding the camera, be sure not to cover the lens with your fingers
or the camera strap.
• When the focus is not adjusted on the subject, use the focus lock function
(see page 37).
4 4 Adjust the image range and size with the
• Using
causes, the image size to become large (Telephoto mode),
and when the
(Wide-angle mode).
.
key is pressed, the image range becomes wide
is pressed once.
/
keys.
31