INSERTING/REMOVING THE COMPACT FLASH(CF) CARD
Be sure to turn off the power of the camera when inserting or removing the CF card into or from
the camera. Otherwise, the data in the card may be lost or the card may be damaged. If you insert
or remove the CF card when the camera is turned on, re-format the CF card after transferring the
data from the card to your computer if the data is safe.
INSERTING THE CF CARD
1 Open the card-slot door as shown in the figure.
2 Insert the CF card into the card slot.
• Position the flat edge side of the card towards the camera lens and
insert the card with the signal part facing down until the card stops.
• Insert the card straight. Do not insert it on an angle.
• If the card is stopped halfway, check the direction of the card. The
card can be inserted in only one direction. Forcing the card into the
slot may damage the card or the camera.
27