INSERTING THE BATTERIES
This camera uses four AA-size (1.5v) alkaline or Ni-MH batteries.
• When using Ni-MH batteries, fully recharge them with a vendor-endorsed battery charger.
• Be careful when removing batteries from the camera as the batteries generate heat when the
camera is operated.
1 When replacing the batteries, slide the power switch to
turn off the camera.
* You may skip this step when inserting the batteries for the first time after
a purchase.
2 Slide the battery-chamber door slightly in the 1 direction
and open it in the 2 direction.
3 Insert the batteries by following the +/- diagram indicated
in front of the battery-chamber door.
23