Table of Contents
Advertisement
Inter-Tel INT2000 User Guide
STATION SPEED DIALING
Storing Station Speed-Dial Numbers
You can store up to 10 personal speed-dial numbers and associated names in
station speed-dial "locations" 0–9. These locations are then dialed using a
feature button or code plus one of the numbers 0–9 on your dialpad. Or, if you
have programmable feature buttons, you can create Station Speed-Dial but-
tons (as described on page 13) for one-touch speed dialing.
To program your station speed-dial locations:
1. Dial
3
2. Dial the location code 0–9 to be programmed OR press a Station Speed-
Dial button that you want to program (if you have one).
3. Enter the desired name for the speed-dial number to be programmed, as
described below:
• Remain in alphanumeric mode: Press the keypad buttons to enter the
desired characters. (Refer to the chart on page 26.) The number of
times a button is pressed determines which character is entered. For
example, 533266 would enter "JEAN." You need a FORWARD but-
ton to enter adjoining characters that are located under the same but-
ton or to leave spaces. For adjoining characters, press the FOR-
WARD button once to advance to the next character. For example,
66FWD6667776 would enter "NORM." (Note that letters corre-
spond to the letters printed on keypad buttons 1–9.) Press the FOR-
WARD button twice to leave a space.
• Change to numeric mode: Press the MSG button (if you have one)
and then press the keypad buttons to enter the desired numbers. Press
#
WARD button, you can press it to leave a space.
4. Press
#
5. Dial the extension number or telephone number to be stored. If your num-
ber includes an asterisk, pound, a hookflash (a quick hangup and re-
lease), or a pause, press the SPCL button once for an asterisk (*), twice
for a pound (#), three times for a hookflash, or four times for a pause.
(Each pause and/or hookflash counts as one of the 16 digits.) If you have a
FORWARD button, you can enter more than one *, #, pause, or hookflash
in a row by pressing FORWARD to move to the next character.
.
8
3
for a hyphen (–), or press
to save the name.
for a colon (:). If you have a FOR-
*
24
Advertisement
Table of Contents
