Intercom Calls; Placing Intercom Calls; Receiving Intercom Calls - Inter-Tel INT2000 User Manual

Cordless telephone

Table of Contents

Inter-Tel INT2000 User Guide

INTERCOM CALLS

To place an intercom call:

1. If necessary, press TALK. You will see ACQUIRING LINK.

2. Dial an extension number.

3. If your call goes through handsfree to the called phone's speaker, speak

after you hear a double tone. If you hear continuous ringing, wait for the

call to be answered.

4. When you finish the call, press the TALK button again. This will hang up

the phone and put it in standby mode.

Options

If you want to place a non-handsfree call that will ring at the other phone

until answered:

• Press

essary if you programmed your INT2000 for the Ring Intercom Al-

ways feature described on page 34.)

If there is no answer, you can do any of the following:

• You can leave a message: Press SPCL and dial

your MSG button, if you have one). Then hang up OR wait for the

message center to answer. (See page 20 for more Message options.)

• If the party you called is busy, you can stay on the line and wait for

the phone to become available: When you hear busy signals, do not

hang up. After a system timer expires, you hear music until the

phone is available. (You cannot do this if the called phone is in do-

not-disturb mode.)

To receive an intercom call:

1. Press TALK or lift the Handset out of the Battery Charger.

2. When you finish the call, press TALK or place the Handset back on the

Battery Charger.

before dialing the extension number. (This step is not nec-

(or press

Table of Contents