Vivotek SF8174 User Manual page 239

8.29 Remote Camera Control
(capability.remotecamctrl.master>0)
Note: This request requires Viewer access privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/rCamCtrl.cgi?[channel=<value>]
[&x=<value>&y=<value>&r=<value>&videosize=<value>&resolution=<value>&stretch=<value>]
image
[&camid=<value>]
[&return=<return page>]
Example:
http://myserver/cgi-bin/camctrl/rcamctrl.cgi?channel=0&x=300&y=200&r=100&resolution=1920x1920&videos
ize=1920x1920&strech=1&camid=0
PARAMETER VALUE
channel <0~(n-1)>
x <integer>
y <integer>
r <integer>
videosize <window size>
resolution <window size>
stretch <boolean>
camid 0,<positive integer>
return <return page>
DESCRIPTION
Channel of video source.
x-coordinate clicked by user.
It will be the x-coordinate of client side camera after movement.
y-coordinate clicked by user.
It will be the y-coordinate of client side camera after movement.
radius select by user. It will be the roi view area radius of client side
camera after movement and zooming.
The size of plug-in (ActiveX) window in web page
The resolution of streaming.
0 indicates that it uses resolution (streaming size) as the range of
the coordinate system.
1 indicates that it uses videosize (plug-in size) as the range of the
coordinate system.
slave camera ID
Redirect to the page <return page> after the parameter is assigned.
The <return page> can be a full URL path or relative path according to
the current path. If you omit this parameter, it will redirect to an
empty page.
VIVOTEK
– Click on
User's Manual - 239