Hardware Installation - Sf8174 - Vivotek SF8174 User Manual

VIVOTEK

Hardware Installation - SF8174

First, open the dome cover by pressing the release button. You may squeeze the opposite edge
of the dome cover if the dome cover does not come off easily. Then, follow the steps below to in-
stall the camera to either a ceiling or a wall.
Release button
If you plan to route cables from the side of camera,
remove the rubber slide cover from the dome cover.
Connecting Ethernet Cable & the Power and IO
Cable
Connect the supplied power & IO cables if your
switch does not support PoE. Connect the white
header connectors to J6 and J7 on the camera.
20 - User's Manual
Slide cover
J7
Power & IO Cable
J6