Vivotek SF8174 User Manual page 135

VIVOTEK
To start a module, select the checkcircle in front, and click the Start button.
If you should need to remove a module, select the checkcircle in front and then click the Stop
button. By then the module status will become OFF, and the X button will appear at the end of
the row. Click on the X button to remove an existing module.
When prompted by a confirm message, Click Yes to proceed.
No
Yes
Note that the actual memory consumed while operating the module will be indicated on the
Memory status field. This helps determine whether a running module has consumed too much
of system resources.
User's Manual - 135