Vivotek SF8174 User Manual page 234

VIVOTEK
Return Code
400 Bad Request
415 Unsupported Media Type
8. 25 Open Anystream (capability.nanystream > 0)
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/videoany.mjpg?codectype=mjpeg[&resolution=<value>&mjpeg_quant=<value>&mjpeg
_qvalue=<value>&mjpeg_maxframe=<value>]
For RTSP (MPEG4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=mpeg4[&resolution=<value>&mpeg4_intraperiod=<value>&mpe
g4_ratecontrolmode=<value>&mpeg4_quant=<value>&mpeg4_qvalue=<value>&mpeg4_bitrate=<value>&m
peg4_maxframe=<value>]
For RTSP (H264), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=h264[&resolution=<value>&h264_intraperiod=<value>&
h264_ratecontrolmode=<value>& h264_quant=<value>& h264_qvalue=<value>& h264_bitrate=<value>&
h264_maxframe=<value>]
<product dependent>
PARAMETER
codectype
solution
mjpeg_quant
mjpeg_qvalue
234 - User's Manual
Description
Request is rejected because some parameter values are illegal.
Returned, if forcechk appears, when minsft is not achievable or the
timeshift feature of the target stream is not enabled.
VALUE
mjpeg, mpeg4, h264
<product dependent>
capability_videoin_resolution <product
0, 1~5
99, 1~5
<product dependent>
10~200
2~97
<product dependent>
DEFAULT DESCRIPTION
N/A Set codec type for Anystream.
Video resolution in pixels.
dependent>
3 Quality of JPEG video.
0,99 is the customized manual input
setting.
1 = worst quality, 5 = best quality.
<product dependent>
50 Manual video quality level input.
<product (This must be present if mjpeg_quant is
dependent> equal to 0, 99)
<product dependent>