Vivotek SF8174 User Manual page 22

VIVOTEK
IMPORTANT:
Refer to the "Panoramic PTZ Installation Guide" in your product CD for design considerations
before you proceed with physical installation.
Attach Camera to Mounting Adaptor
An adapter bracket, AM-517, is required.
1. Align the bracket's screw slots with mounting holes on the AM-51A.
2. Secure the bracket to AM-51A using 2 pan head M2.6 screws.
3. Align the camera's screw slots
with the C holes.
4. Use the included M2.6 screws
to secure camera to bracket.
Ceiling Mount Installation
Install the Pendant Pipe
Below is a sample procedure
using a pendant pipe:
1. Determine a hard surface ceil-
ing location, and use the four
mounting holes on the pendant
head to mark the positions
where holes will be drilled to
secure the pendant head. Note
that screws are user-supplied
and they should be at least
11mm long.
2. Route cables through the pen-
dant pipe and the pendant
head.
22 - User's Manual
C
A
B
B
4 " 4 "
A
B
C
AM-114
1
AM-117
AM-51A
473 mm
47mm
178 mm