Vivotek SF8174 User Manual page 223

addpos <Text string less than
40 characters>
delpos <Text string less than
40 characters>
return <return page>
8.15 Fisheye local dewarp camera control (capability.
fisheyelocaldewarp.c0 > 0,
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/fdCamCtrl.cgi?channel=<value>&stream=<value>
[&move=<value>] – Move home, up, down, left, right
[&zoom=<value>] – Zoom wide, tele
[[&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>]]
[&x=<value>&y=<value>&videosize=<value>&resolution=<value>&stretch=<value>]
the center of image to the coordination (x,y) based on resolution or videosize of 1O mode.)
[&return=<return page>]
Example:
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&move=right
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&zoom=tele
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&move=top&speedtilt=-1
http://myserver/cgi-bin/camctrl/fdCamCtrl.cgi?channel=0&stream=0&x=700&y=700&videosize=1920x1920&r
esolution=1920x1920&stretch=1
PARAMETER VALUE
channel <0~(n-1)>
stream <0~(m-1)>
move home
up
down
Add one preset location to the preset list.
Delete preset location from the preset list.
Redirect to the page <return page> after the parameter is assigned.
The <return page> can be a full URL path or relative path according to
the current path.
not used in SF8174)
DESCRIPTION
Channel of video source.
Stream.
Move to home position.
Move up.
Move down.
– Set speeds
– Click on image (Move
VIVOTEK
User's Manual - 223