Vivotek SF8174 User Manual page 196

VIVOTEK
uart_httptunnel <boolean>
transmission_mode Tx,
Rx,
Both
network_wire <boolean>
network_wireless <boolean>
wireless_s802dot11b <boolean>
wireless_s802dot11g <boolean>
wireless_encrypt_we <boolean>
p
wireless_encrypt_wp <boolean>
a
wireless_encrypt_wp <boolean>
a2
wireless_beginchann 1 ~ 14
el
wireless_endchannel 1 ~ 14
derivative_brand <boolean>
npreset 0, <positive integer>
eptz 0, <positive integer>
nanystream 0, <positive integer>
iva <boolean>
196 - User's Manual
0 0/7
Tx 0/7
1 0/7
0 0/7
0 0/7
0 0/7
0 0/7
0 0/7
0 0/7
255 0/7
255 0/7
1 0/7
20 0/7
7 0/7
0 0/7
0 0/7
Indicate whether to support HTTP
tunnel for UART transfer.
Indicate transmission mode of the
machine: TX = server, Rx = receiver
box, Both = DVR.
Indicate whether to support Ethernet.
Indicate whether to support wireless.
Indicate whether to support wireless
802.11b+.
Indicate whether to support wireless
802.11g.
Indicate whether to support wireless
WEP.
Indicate whether to support wireless
WPA.
Indicate whether to support wireless
WPA2.
Indicate the begin channel of wireless
network
Indicate the end channel of wireless
network
Indicate whether to support the
upgrade function for the derivative
brand. For example, if the value is
true, the VVTK product can be
upgraded to VVXX. (TCVV<->TCXX is
excepted)
Number of preset locations
A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or
not.
Bit 1 => stream 2 supports ePTZ or
not.
The rest may be deduced by analogy
number of any media stream per
channel
Indicate whether to support Intelligent
Video analysis