Hole-Punch Vertical Position Adjustment - Konica Minolta BizHub Pro 1050 User Manual

02 Hole-Punch Vertical Position Adjustment

Perform this adjustment for the position of punch holes to the direction of paper feed.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 02 Multi Folder (Punch) Adj.
2 Touch 02 Hole-Punch Vertical Position Adjustment to display the Hole-Punch
Vertical Position Adjustment Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, specify Punch, then
press [Start]. A sample pattern (No. 16) will be output.
5 Check the distance (a) from the edge of the feeding sheet to the center position of
the punch hole.
2-24
02 Multi Folder (Punch) Adjustment (continued)
a