Replacing The Rear Drive Belt; Pro 15 And Pro 18 - Husqvarna Rider Pro 18 AWD Operator's Manual

Replacing the Rear Drive Belt Pro 15
and Pro 18:
Removal
1. Remove the transmission cover.
2. Unhook the spring on the belt tensioner (A).
3. Remove the hose clip on the middle and the belt
guide for the centre belt.
4. Pull off the centre belt from the engine's pulley
and pull out the rear section. A used belt can be
pulled downwards. When the belt is new, the
centre belt must be pulled off of its front pulley
whereupon it can be moved downwards from the
engine pulley so that the rear part can be pulled
out.
5. Remove the cooling fan (2).
6. Pull the belt off of the hydrostatic transmission's
pulley.
36
– English
MAINTENANCE
6008-209
A
B
6020-005
8009-364
8009-638
6012-036