Changing the Belt on the Combi 94 and
Combi 112
WARNING!
Protect your hands with gloves
when working with the blades.
On cutting units with "collision-proof" blades, the
blades are driven by a V-belt. Do as follows to
replace the V-belt:
1. Dismantle the cutting unit.
2. Loosen the bolt to the parallel strut and the two
screws on the cover. Lift off the cutting unit
cover.
3. Loosen the spring (4) that tensions the V-belt
and pull the belt off.
Attach a new belt in the reverse order.
MAINTENANCE
8009-287
6012-080
47
English –