Explanation Of Symbols; Key To Symbols - Husqvarna Rider Pro 18 AWD Operator's Manual

These symbols can be found on the Rider and in the operator's manual.
N
Neutral Fast
Oil level
Cutting height
Use hearing
protection
Noise emission to surroundings in accordance
with the directive of the European Community. The
machine's emission is indicated in the TECHNI-
CAL DATA chapter and on the decal.
Never use the Rider if persons, especially
children or pets, are in the immediate vicinity.
4
– English

KEY TO SYMBOLS

Study them carefully so you understand their significance.
Read the operator's manual.
Slow Engine off
Reversing
Hydrostatic free
wheeling
WARNING!
Rotating blades
Never carry passengers on
the Rider or on its tools
Starting instructions
Read the operator's manual
Checking the engine oil level
Check the oil level in the hydrostat
Lift up the cutting unit
Hydrostat pedals in the neutral
position
Apply the parking brake.
Use the choke if the engine is cold.
Starting the engine
Disengage the parking brake before
driving
Tyre Choke
pressures
Forward
Parking brake
WARNING! Risk of the Never drive directly
Rider overturning across a slope
Do not insert your hands or
feet under the cover when
the engine is running
Fuel
Ignition
Warning
CE conformity marking
Drive very slowly
without the cutting
unit
Accelerator pedal forward
Neutral position
Accelerator pedal reversing
Switch off the engine and remove
the ignition cable before carrying
out repairs or maintenance