Maintenance; Maintenance Schedule - Husqvarna Rider Pro 18 AWD Operator's Manual

Maintenance Schedule

The following is a list of maintenance procedures that must be performed on the rider. For points marked
with footnote number 4, turn to an authorised service representative.
= Described in this operator's manual.

Maintenance

Check for fuel and oil leaks
Check the parking brake
Check the engine's oil level (every refuelling)
Check the fuel pump's air filter
Check the safety switch, seat
Check the safety switch, lifting lever
Check the safety switch, pedal system
Check/clean the engine's cooling air intake.
Check the cutting unit:
• mounting of blades
• condition of the blades (sharpness, shape, etc)
Check the steering cables (any play, etc.)
Check fastenings (screws, nuts, etc.)
Start the engine and blades,
listen for abnormal sounds
Clean under the cutting unit
Clean the transmission's cooling air intake
Inspecting the muffler
Check the battery's acid level
Check the transmission oil level
Check the condition of belts, belt pulleys, etc.
Check for damage
Check the tyre pressures (60 kPa / 9 PSI)
Check to ensure that the cable holder
in the middle is undamaged
Clean thoroughly around the engine
Clean carefully around the muffler
Clean thoroughly around the transmission (s)
Clean around all belts, belt pulleys, etc.
Lubricate the belt tensioner (nipple)
Lubricate the three-point link
Lubricate the driver seat
Lubricate all cables
Lubricate links in the cutting unit
Clean the frame tunnel
Lubricate the pedal mechanism
in the frame tunnel
Lubricate the hydrostatic cable with linkage
Lubricate the parking brake cable
Lubricate the throttle
Lubricate the choke control
Lubricate the guide chain in the frame tunnel
Check the steering cables in the frame tunnel
22
– English
MAINTENANCE
= Not described in this operator's manual.
Page
Daily main-
tenance
before after
-
15
59
28
33
33
33
31
45
51
51
25
-
-
48
28
27
31
61
-
-
35
-
31
31
28
-
59
58
58
56
56
-
57
60
61+63
58
58
57
25
Maintenance
Weekly 3) At least
interval hours
once
main-
tenance a year
25 50 100 300