Lifting Lever for the Cutting Unit
The lifting lever is used to put the cutting unit in
either the transport or mowing positions.
1. Pull the lever backwards to the locked position
to engage the transport position.
The unit is raised and the blades stop rotating.
2. Depress the lock button and move the lever
forwards to engage the mowing position.
The unit is lowered and the blades begin to
rotate.
3. The lever can also be used to temporarily
adjust the cutting height, for example, with a
small mound in the lawn.
Cutting Height Adjustment Lever
Using the lever, the cutting height can be adjusted
in 7 different positions.
Combi 94
Combi 103-unit
Combi 112
It is important that the air pressure in both front
wheels is equal, 60 kPa / 0.6 bar / 9 PSI, to
produce an even cutting height.
14
– English
PRESENTATION
30-90 mm
(1 3/16" - 3 1/2")
40-80 mm
(1 9/16" - 3 1/8")
40-100 mm
(1 9/16" - 3 7/8")
Raising the cutting unit
Lowering the cutting unit
8009-486
8009-487
8009-488