Table of Contents
Advertisement
Parking Brake
The parking brake is activated as follows:
1. Press down the parking brake pedal (1).
2. Press the lock button on the steering column (2)
in fully.
3. Release the parking brake pedal while keeping
the button pressed in.
The parking brake lock is automatically disengaged
when the brake pedal is pressed down.
Seat
The seat has a hinged mounting on the front edge
and can be folded forwards.
The seat can also be adjusted lengthways.
When making adjustments, the lever under the front
edge of the seat is moved to the left, after which the
seat can be moved backwards or forwards to the
desired position.
The seat springs can be adjusted by moving the
rubber blocks in their brackets on the underside of
the seat. Set both blocks in the front, centre or rear
positions.
Refuelling
The engine should be run on a minimum of 87-
octane unleaded petrol (not mixed with oil). It can
be beneficial to use environmentally adapted
alkylate petrol. See also "Technical Data"
concerning methanol and ethanol fuels.
Do not fill the tank completely, leave an expansion
area of at least 2.5 cm (1").
WARNING!
Petrol is highly flammable.
Observe caution and fill the tank
outdoors
(see the safety instructions).
Lights and Power Outlet
The lights are switched on and off using the switch
(1) on the control panel.
A seat heater or mobile phone charger are
examples of articles that can be connected to the
power socket (2). The power outlet is switched on
and off using power switch (3) on the control panel.
The voltage is 12V. The electrical outlet socket is
fuse protected by its own fuse.
PRESENTATION
8009-490
8009-491
8009-330
1
2
3
8009-546
15
English –
Hide quick links:
Advertisement
Table of Contents
