Fuses; Checking The Tyre Pressures - Husqvarna Rider Pro 18 AWD Operator's Manual

Husqvarna rider operator's manual
Hide thumbs Also See for Rider Pro 18 AWD:
Table of Contents

Advertisement

Fuses

The main fuse is placed in a detachable holder
under the battery case's cover, in front of the
battery.
Type: Flat pin, 15 A.
The fuse for the power outlet is placed under the
ignition switch, behind the side plate on the control
panel.
Type: Flat pin, 7.5 A.
Do not use any other type of fuse when replacing.
A blown fuse indicates that the mounting has burnt
off. Pull the fuse from the holder when replacing.
The fuse is there to protect the electrical system. If
it blows again shortly after replacement, it is due to
a short circuit, which must be fixed before the
machine can be put into operation again.

Checking the Tyre Pressures

The tyre pressure should be 60 kPa / 0.6 bar /
9 PSI on all wheels. The highest permitted
pressure is 100 kPa / 1.0 kp/cm
IMPORTANT INFORMATION
Different air pressure in the front tyres will
result in the blades mowing the grass at
different heights.
MAINTENANCE
2
/ 14 PSI).
8009-370
8009-586
6017-100
35
English –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rider pro 18Rider pro 15

Table of Contents