Husqvarna Rider Pro 18 AWD Operator's Manual page 79

Husqvarna rider operator's manual
Hide thumbs Also See for Rider Pro 18 AWD:
Table of Contents

Advertisement

Action
At Least Once Each Season
1. Change the engine oil (100 hours).
2. Clean/Replace the air filter's pre-cleaner (foam plastic filter)
(25 hours). (Shorter intervals for dusty operating conditions.)
3. Clean/Replace the air filter's paper filter (100 hours).
(Shorter intervals for dusty operating conditions.)
4. Clean the fuel pump's air filter (50 hours).
5. Check the mounting bolts on the muffler.
6. Adjust the cutting height (50 hours).
7. Adjust the parking brake (50 hours).
8. Inspect the flame proofing/spark arrestor, extra equipment
(50 hours).
9. Replace the engine oil filter (200 hours).
10. Clean/Replace the spark plugs (100 hours).
11. Change the inline fuel filter (100 hours).
12. Clean/Replace the pulse air filter (100 hours).
13. Clean the cooling fins (100 hours) on the engine and
transmissions.
(Shorter intervals for dusty operating conditions.)
14. Check the play in the engine valves (300 hours).
15. Replace the hydraulic oil filter (every 200 hours) on Pro 18 and
AWD.
16. Replace the suction filter in the hydraulic tank every 200 hours on
AWD.
17. Change the oil in the hydraulic system/gearbox (200/500 hours).
On Pro 18 also filter replacement.
18. Perform the 300-hour service at an authorised service
representative.
SERVICE JOURNAL
Date, mileage reading, stamp,
signature
77
English –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rider pro 18Rider pro 15

Table of Contents