Using And Entering Station Speed Dial Numbers - iPECS LIP-8008D User Manual

LIP-8008D User Guide
To place a call using Station Speed Dial:

Lift the handset,

Press

Dial the desired Station Speed Dial bin number (00-19 or 000-
099 or 000-049).
To enter a Station Speed Dial number with CO Line and Name:

Press

Press

Dial the desired Station Speed Dial bin number,

Select/dial the CO/IP line/group,

Dial the desired number to be stored,

Press

Enter the associated name, if desired,

Press

3.3.4 Using and Entering Station Speed Dial Numbers

Each station in the iPECS-100 System is allocated
memory for 20 Station Speed Dial numbers (bins 00-
19) each up to 48 digits. The iPECS-300 & 600 & 1200
each support 100 Station Speed Dial numbers (bins
000-099). The iPECS-MG 100 & 300 each support 50
Station Speed Dial numbers (bins 000-049). These
numbers are entered at the user's station and may
include
instructions and the corresponding button are:
PAUSE will momentarily stop dialing.
FLASH as 1
FLASH not as 1
flash on the CO line.
CALL BACK
Keypad Facility message.
'*' as 1
number will not be displayed when used.
'*' not as 1
the system will switch from pulse to tone dialing.
When entering a Speed Dial, a 16 character name may
be associated with the number for Dial by Name.
,
SPEED
/ ,
TRANS PGM
,
SPEED
/S ,
HOLD AVE
/S .
HOLD AVE
several 'special'
st
digit—Activate dial tone detect.
st
digit—The system will generate a
st
as 1 digit—Send digits as ISDN
st
digit—Display Security, the stored
st
digit—Dial Pulse to Tone Switchover,
22
instructions. Special