Product Key Features - HIKVISION Network Digital Video Recorder User Manual

User Manual of Network Video Recorder

Product Key Features

General

Connectable to the network cameras, network dome and encoders.

Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,
PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt
ONVIF or PSIA protocol.

Each channel supports dual-stream.

Up to 64 network cameras can be added.

Independent configuration for each channel, including resolution, frame rate, bit rate, image quality,
etc.

The quality of the input and output video is configurable.
HDD Management

Up to 8 SATA hard disks, 8 network disks (8 NAS disks, or 7 NAS disks+1 iSCSI disk) and 1 eSATA
disk can be connected, each disk with a maximum of 4TB storage capacity.

Support RAID0, RAID1, RAID5, RAID10 storage scheme. And 8 virtual disks can be
configured.(Only for DS-9500NI-RT series NVR)

Support eSATA disk for recording or backup.

Support S.M.A.R.T. and bad sector detection. (Not supported with DS-9500NI-RT series NVR.)

HDD group management.

Support HDD standby function.

HDD property: redundancy, read-only, read/write (R/W).

HDD quota management; different capacity can be assigned to different channel.
Recording and Capturing

Holiday recording schedule configuration.

Cycle and non-cycle recording mode.

Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm.

8 recording time periods with separated recording types.

Pre-record and post-record for alarm, motion detection for recording or capture, and pre-record time
for schedule and manual recording.

Searching record files and captured pictures by events (alarm input/motion detection).

Locking and unlocking record files.

Local redundant recording and capturing.

Manual capturing and continuous capturing are supported.
Backup

Support NTFS and FAT32 formatted backup devices.

Export data by USB or eSATA devices.

Management and maintenance of backup devices.

Either Normal or Hot Spare working mode is configurable to constitute an N+1 hot spare system.
Alarm and Exception

Configurable arming time of alarm input/output.

Alarm for video loss, motion detection, tampering, abnormal signal, illegal login, network
5