Managing Hot Spare System - HIKVISION Network Digital Video Recorder User Manual

User Manual of Network Video Recorder
3. Set the Work Mode as Normal Mode (default).
4. Select the Operation type as Add Spare Device in the drop-down list and enter the IP address and password
of hot spare device.
5. Check the checkbox of Enable to enable the hot spare function.
6. Click the Yes button to save the settings.
If the working device connects to the hot spare device successfully, you can see the working status in the
N+1 configuration interface.

7.5.3 Managing Hot Spare System

Steps:
1. Enter the Hot Spare Settings interface of the hot spare device.
2. Select the Operation Type as Add Work Device, input the IP address in the text filed and click the Yes button
Figure 7. 13 N+1 Configuration Interface
Figure 7. 14 Hot Spare Information
Figure 7. 15 Add Working Device
42