Table of Contents
Advertisement
User Manual of Network Video Recorder
8.5 Configuring Tamper-proof
Purpose:
Trigger alarm when the lens is covered and take alarm response action(s).
Steps:
1.
Enter Tamper-proof settings interface
Configuration> Remote Configuration> Camera Settings> Tamper-proof
2.
Select the channel number for tamper-proof.
3.
Check the checkbox of Enable Tamper-proof.
4.
Click
button to draw a detecting area, click it again to stop drawing. Click
clear the area.
5.
Drag
6.
Please refer to step 3 of Chapter 8.1 Configuring Alarm Input to set arming schedule.
7.
Please refer to step 5 of Chapter 8.4 Configuring Video Loss to set linkage method.
Figure 8. 8 Tamper-proof
bar to adjust the sensitivity.
52
button if you want to
Hide quick links:
Advertisement
Table of Contents
