Calling A Preset - HIKVISION Network Digital Video Recorder User Manual

User Manual of Network Video Recorder
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
Note: Up to 256 presets can be configured.

5.2.3 Calling a Preset

Purpose: This feature enables the camera to point to a specified preset scene when an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In live view mode, select a defined preset from the list and click
Note: You can set Pattern and Patrol mode in the iVMS-4200 client software. Please refer to the User Manual of
iVMS-4200 Client Software for detailed information.
Figure 5. 3 Preset List
28
to call a preset.